Robotic Table

The BeOSL ezClip is a single BeO detector element and ready to be paired with our BeOSL Ring Dosimeter and Eye Lens Dosimeter. Fit in the ezCase, the BeOSL ezClip can be handled exactly like the whole body dosimeter; it allows the user to read, erase and prepare the ezClip.

The BeOSL Area Dosimeter measures radiation exposure in terms of ambient dose equivalent H*(10). As it is a BeOSL Dosimeter, the detector material remains beryllium oxide (BeO).

Our BeOSL Dosimeters are personal dosimeters for measuring the personal dose equivalents H_p(10) and H_p(0.07). The four-element version has two additional detectors that are shielded by both with copper and lead. This combination receives information over a wide energy range.

Our BeOSL Dosimeters are personal dosimeters for measuring the personal dose equivalents Hp(10) and Hp(0.07). The two-element version carries two BeO detectors. For each unit (Hp(10) and Hp(0.07)) only one detector is used.

The BeOSL Reader measures radiation exposure using a state-of-the-art technology, called optically stimulated luminescence (OSL).

The BeOSL Eraser complements the BeOSL Reader in every BeOSL System. Unlike the BeOSL Reader, the BeOSL Eraser permanently removes all dose information from the dosimeter. Then the dosimeter can be assigned to either the same or a new user.

The BeOSL Irradiator completes the BeOSL System. It is a device for manually or automatically exposing BeOSL Dosimeters to radioactive radiation. This can also be used to verify the calibration factors of dosimeters, irradiate QA dosimeters or for test irradiations.