This 2-day course is designed as an introduction to common air monitoring concepts, featuring detailed instructions on iCAM calibration and maintenance functions. The course begins with an introduction of the Mirion iCAM instrument, including a description of all components and theory of operation. Potential fault and alarm indicators will be discussed, as well as how to address problems that could arise during operation. After reviewing the hardware components, the iConfig software will be demonstrated to show the functionality of this power configuration tool. Once the iCAM setup is complete, the course will cover options and methods for calibrating the instrument, including alpha and beta calibrations along with airflow calibrations. Each step will be explained and students will be able to calibrate the instrument during a “hands-on” lab portion of the course. Other topics for discussion will include evaluation of calibration results and routine iCAM maintenance procedures. Approximately 40% of this course will be presented in lecture format, with the remaining time allocated for “hands-on” exercises and discussion.

This 2-day course includes lectures and hands-on exercises to familiarize the attendee with the operating principles, setup, and calibration of the Mirion ARGOS™-5AB with ZEUS™ option. These calibration principles can be applied and extended to the GEM™-5 gamma exit monitor, the CRONOS® tool/object monitor, and the SIRIUS™-5 Hand/Cuff and Foot monitor. The steps required to properly setup, calibrate, alarm test, troubleshoot, and perform required maintenance on these monitors will also be covered. Click link below for full course description

This 2-day course focuses on the Apex-Alpha/Beta™ software setup, database interaction and automated sample processing operations utilizing a combination of lecture and practical examples for instruction. Approximately 50% of the class time will be allocated for hands-on exercises to help reinforce the concepts needed to count and report gross alpha and beta results. The training will cover the architecture of the Apex-Alpha/Beta software, installation, operational setups, calibrations, security, reports, QA, data review, and event logging. Discussions will also include supported modifications to the standard Apex-Alpha/Beta Stimulsoft reports. Click link below for full course description